VIBRO-LASER Pro System combines all of the common features with bolt or base bound, select coupling type option and adds advanced features found in the most capable shaft alignment systems such as machine train - enable this option and align shafts of up to five machines that are connected together.
Live move mode allows live alignment in any angle position of the measuring units.
Multipoint method SMARTPOINTS™ allows you to record an unlimited number of points at any sector of the shaft circumference.
SMARTPOINTS™ mode meets alignment machines with sleeve bearings or uncoupled machines.
With hundreds of points registered SMARTSPIN™ provides the greatest possible repeatability of measurements. The measured values are automatically recorded during shaft rotation. It is perfect for turbine generator alignment.
Horizontal AlignmentA brand-new step by step, intuitive interface with 3D animation simplifies the operator's work and reduces time spent on alignment. A unique memory management system allows you to save progress at any stage of the process and resume whenever you want
Clock MethodAn alignment method which requires the measurements taken at any three of four preset clock positions (3, 6, 9 and 12 o'clock)
SmartSpin™The measured values are automatically recorded during shaft rotation. With hundreds of points registered, you can start measuring at any shaft position. The measurement quality is controlled by a certified processing algorithm based on Shelley™ AI, which provides the greatest possible repeatability of measurements.
SmartPoints™This multipoint method allows you to record an unlimited number of points at any sector of the shaft circumference. It is perfect for centering turbines and machines with sleeve bearings
SmartAngle™ Take measurements at any three positions of the shaft rotation. Turn shafts in any direction at least by 20 degrees and register the results. This mode is extremely helpful when the clock method is off limits
Vertical/Flange Mounted Machines Measure and align vertical and flange machines with a program specially created for this purpose
Soft Foot CheckAdjust machine feet beforehand for better results. Soft foot check option is designed specifically for this job. The program analyzes the position of machine feet, indicates if any of them need adjustment, and saves all values for the further work
Bolt or Base BoundGet any pair of feet locked on the machine. Enabling this option will ensure precise results when aligning base-bound or bolt-bound machines.
Select Coupling TypeThis option allows you to specify the coupling type used for shaft connection – i.e., short flex or spacer shaft
Machine TrainEnable this option and align shafts of up to five machines that are connected together
User Defined ToleranceSpecify the alignment tolerance and user definable tolerances in advance according to the machine rotation speed
SmartFilter™Keep the alignment precise under any circumstances. The averaging filter reduced the influence of external visual challenges such as lighting, steam, and other visually impairing variables while taking measurements
VibeDr™VibeDr filters vibration related influences that can negatively impact precision alignment thus insuring the machines in the same proximity do not adversely affect your alignment job.
Sensor ReadingsMonitor the data coming directly from the measuring units on the screen of your device
Save Job Save Job Feature - Allows user save alignment job status at any time and return to the job at a later time
User Friendly ReportsSave alignment reports in PDF, add photos of the unit, the company logo and work notes when necessary
Thermal Growth ExpansionAutomatic compensation system for the thermal growth expansion of machines allows to keep the efficiency of alignment in any environment
Switchit™Simplify the measurements by selecting the machine location relative to an operator.
Live Move ModeAllows live aligning in any angle position of the measuring units. When it is not possible to install the measuring units strictly in the 9–12–3 hours position
Shims CalculatorAllows user simulate changes in alignment results with virtual movement of the machine in horizontal and vertical planes
Repeatability TableAllows choose any from the last 10 measurements that you have taken based on which further actions will be carried out
SmartShift™When it’s necessary to change the position of the laser units or change the position of the laser on the detector during the measurement, you have to use feature the Smart Shift™
Certificate of state registration in the Register of computer programs No. 2021613745 dated March 12, 2021
90mm x 60mm x 32mm(3.5 in x 2.3 in x 1.2 in)
diode laser with wavelength 635nm, class II, <1 mW
Distance Between Units
up to 10 m (33 ft)
Detector Receiver Length
30 mm (1.2 in)
Ex Certification (option)
EACEx in accordance with Customs Union Technical Regulation TP TC 012/2011. Harmonized with UL as per https://www.ul.com/services/eurasian-conformity-eac-ex-certification